UM Home | Faculties, Academies, Institutes & Centres | Utama | Publication

Journals

2015

  1. Hosen M. A., Jumaat M. Z. & Islam A. B. M. S. (2015). Inclusion of CFRP-Epoxy composite for End Anchorage in NSM-Epoxy Strengthened Beams. Advances in Materials Science and Engineering. Vol. 2015. (ISI/SCOPUS Cited Publication)

  2. Shukri, A., Darain, K., & Jumaat, M. (2015). The Tension-Stiffening Contribution of NSM CFRP to the Behavior of Strengthened RC Beams. Materials, 8(7), 4131 4146. (ISI-Cited Publication)

  3. Darain, K. M., Jumaat, M. Z., Islam, A. B. M. S., Obaydullah, M., Iqbal, A., Adham, M. I., & Rahman, M. M. (2015). Energy Efficient Brick Kilns for Sustainable Environment. Desalination and Water Treatment. 1-10. (ISI/SCOPUS Cited Publication)

  4. Islam, A. B. M. S., Jumaat, M. Z., Ahmmad, R. and Darain, K. M. (2015). Retrofitting of vulnerable RC structures by base isolation technique. Earthquakes and Structures. Accepted. (ISI/SCOPUS Cited Publication)

  5. Islam, A. B. M. S., Jumaat, M. Z., and Hussain, R. R. (2015). Incorporation preference for rubber-steel bearing isolation in existing eminent building structure. Computers and Concrete. (ISI/SCOPUS Cited Publication)

  6. Islam, A. B. M. S., Jumaat, M. Z., and Hussain, R. R. (2015). Incorporation preference for rubber-steel bearing isolation in existing eminent building structure. Computers and Concrete. Accepted. (ISI/SCOPUS Cited Publication)

  7. Alsubari, B., Shafigh, P., & Jumaat, M. (2015). Development of Self-Consolidating High Strength Concrete Incorporating Treated Palm Oil Fuel Ash. Materials, 8(5), 2154-2173. (ISICited Publication)

  8. Ranjbar, N., Mehrali, M., Mehrali, M., Alengaram, U. J., & Jumaat, M. Z. (2015). Graphene nanoplatelet-fly ash based geopolymer composites. Cement and Concrete Research, 76, 222-231. (ISI-Cited Publication)

  9. Aslam, M., Shafigh, P., Jumaat, M. Z., & Shah, S. N. R. (2015). Strengthening of RC beams using prestressed fiber reinforced polymers A review. Construction and Building Materials, 82, 235-256. (ISI-Cited Publication)

  10. Mo, K. H., Johnson Alengaram, U., Jumaat, M. Z., & Yap, S. P. (2015). Feasibility study of high volume slag as cement replacement for sustainable structural lightweight oil palm shell concrete. Journal of Cleaner Production, 91, 297-304. (ISI-Cited Publication)

  11. Yap, S. P., Alengaram, U. J., Jumaat, M. Z., & Khaw, K. R. (2015). Torsional behaviour of steel fibre- reinforced oil palm shell concrete beams. Materials & Design, 87, 854-862. (ISI-Cited Publication)

  12. Hosen, M. A., Jumaat, M. Z., & Islam, a. B. M. S. (2015). Side Near Surface Mounted (SNSM) technique for flexural enhancement of RC beams. Materials & Design, 83, 587 597. (ISI-Cited Publication)

  13. Mo, K. H., Alengaram, U. J., & Jumaat, M. Z. (2015). Utilization of ground granulated blast furnace slag as partial cement replacement in lightweight oil palm shell concrete. Materials and Structures, 48(8), 2545-2556. (ISI-Cited Publication)

  14. Mo, K. H., Alengaram, U. J., & Jumaat, M. Z. (2015). Compressive behaviour of lightweight oil palm shell concrete incorporating slag. Construction and Building Materials, 94, 263-269. (ISICited Publication)

  15. Mo, K. H., Alengaram, U. J., Visintin, P., Goh, S. H., & Jumaat, M. Z. (2015). Influence of lightweight aggregate on the bond properties of concrete with various strength grades. Construction and Building Materials, 84, 377-386. (ISI-Cited Publication)

  16. S.S.G.Hashemi, H.B.Mahmud and M.A.Ashraf, Performance of green roofs with respect to water quality and reduction of energy consumption in tropics: A review, Renewable and Sustainable Energy Reviews, Vol. 52, 2015, pp 669-679 (ISI Indexed Journal) (ISI-Cited Publication)

  17. M.K.Yew, H.B.Mahmud, P.Shafigh, B.C.Ang and M.C.Yew., Effects of polypropylene twisted bundle fibres on the mechanical properties of high strength oil palm shell lightweight concrete, Paper accepted for publication in Materials and Structures (ISI Indexed Journal) (Accepted Feb 2015) (ISI-Cited Publication)

  18. S.Salleh, M.G.Shaaban, H.Mahmud and R.Suresh, The compressive strength of Flemish bond wall by exploiting spent copper slag from shipyard waste, Applied Mechanics and Materials Vol. 700, 2015, pp 407-412

  19. S.Salleh, M.G.Shaaban, H.Mahmud and R.Suresh, The compressive strength of Flemish bond wall by exploiting spent copper slag from shipyard waste, Applied Mechanics and Materials Vol. 700, 2015, pp 407-412 (SCOPUS-Cited Publication)

  20. M.K.Yew, H.Mahmud, B.C.Ang and M.C.Yew., Influence of different types of polypropylene fibre on the mechanical properties of high strength oil palm shell lightweight concrete, Construction and Building Materials Vol 90 Aug 2015, pp 36-43 (ISI-Cited Publication)

  21. Ghaedi, K., Jameel, M., Ibrahim, Z. and Khanzaei, P. (2015). Seismic analysis of roller compacted concrete (rcc) dams considering effect of sizes and shapes of galleries. KSCE Journal of Civil Engineering, 20(1). pp. 261-272 (ISI Cited Publication)

  22. S. Kashif Ur Rehman, Z. Ibrahim, S. Ali Memon and M. Jameel (2015). Nondestructive test methods for concrete bridges: A review. Construction and Building Materials, http://dx.doi.org/10.1016/j.conbuildmat.2015.12.011 (ISI-Cited Publication)

  23. Foong, K.Y., Alengaram, U.J., Jumaat, M.Z., & Mo, K.H. (2015). Enhancement of the mechanical properties of lightweight oil palm shell concrete using rice husk ash and manufactured sand. Journal of Zhejiang University SCIENCE A, 16(1), 59-69. doi:10.1631/jzus.A1400175. (ISI/SCOPUS Cited Publication)

  24. Mo, K. H., Alengaram, U. J., &Jumaat, M. Z. (2015). Compressive Behaviour of Polyarcylonitrile Fibre Reinforced Lightweight Aggregate Concrete Composite. Advanced Materials Research, 1115, 188-191 [NON SCOPUS/ NON ISI] (Non-ISI/Non-SCOPUS Cited Publication)

  25. Sharmin, A., Alengaram, U. J., Jumaat, M. Z., Kabir, S. M. A., & Bashar, I. I. (2015). Engineering properties of lightweight geopolymer concrete with oil palm shell and palm oil clinker. Rev. T c. Ing. Univ. Zulia., 38( N 1), 34-48 [SCOPUS/ ISI] (ISI/SCOPUS Cited Publication)

  26. Mo, K. H., Alengaram, U. J., Jumaat, M. Z., & Yap, S. P. (2015). Feasibility study of high volume slag as cement replacement for sustainable structural lightweight oil palm shell concrete. Journal of Cleaner Production. (ISI/SCOPUS Cited Publication)

  27. Yap, S. P., Alengaram, U. J., Jumaat, M. Z., & Khaw, K. R. (2015). Torsional and cracking characteristics of steel fiber-reinforced oil palm shell lightweight concrete. Journal of Composite Materials, 0021998315571431. (ISI/SCOPUS Cited Publication)

  28. Mo, K. H., Alengaram, U. J., Visintin, P., Goh, S. H., & Jumaat, M. Z. (2015). Influence of lightweight aggregate on the bond properties of concrete with various strength grades. Construction and Building Materials, 84, 377-386 [SCOPUS/ ISI] (ISI/SCOPUS Cited Publication)

  29. Kabir, S., Alengaram, U. J., Jumaat, M. Z., Sharmin, A., & Islam, A. 2015. Influence of Molarity and Chemical Composition on the Development of Compressive Strength in POFA Based Geopolymer Mortar. Advances in Materials Science and Engineering, 2015, 15. doi: http://dx.doi.org/10.1155/2015/647071 [SCOPUS/ ISI] (ISI/SCOPUS Cited Publication)

  30. Mo, K. H., Alengaram, U. J., & Jumaat, M. Z. (2015). Compressive behaviour of lightweight oil palm shell concrete incorporating slag. Construction and Building Materials, 94, 263-269 [SCOPUS/ ISI] (ISI/SCOPUS Cited Publication)

  31. Mo, K. H., Alengaram, U. J., Jumaat, M. Z., & Liu, M. Y. J. 2015. Contribution of acrylic fibre addition and ground granulated blast furnace slag on the properties of lightweight concrete. Construction and Building Materials, 95, 686-695 [SCOPUS/ ISI] (ISI/SCOPUS Cited Publication)

  32. Islam, A., Alengaram, U.J., Jumaat, M.Z., Bashar, I.I., Kabir, S.M.A. (2015). Engineering properties and carbon footprint of ground granulated blast- furnace slag-palm oil fuel ash-based structural geopolymer concrete. Construction and Building Materials, 101, 503-521. (ISI/SCOPUS Cited Publication)

  33. Yap, S. P., Alengaram, U. J., Jumaat, M. Z., & Khaw, K. R. (2015). Torsional behaviour of steel fibre- reinforced oil palm shell concrete beams. Materials & Design, 87, 854-862. [SCOPUS/ ISI] (ISI/SCOPUS Cited Publication)

  34. Yap, S. P., Alengaram, U. J., & Jumaat, M. Z. (2015). The effect of aspect ratio and volume fraction on mechanical properties of steel fibre- reinforced oil palm shell concrete. Journal of Civil Engineering and Management (ahead-of-print), 1-10 [SCOPUS/ ISI] (ISI/SCOPUS Cited Publication)

  35. Ahmmad, R., Jumaat, M. Z., Alengaram, U. J., Bahri, S., Rehman, M. A., & Hashim, H. 2015. Performance evaluation of palm oil clinker as coarse aggregate in high strength lightweight concrete. Journal of Cleaner Production. (ISI/SCOPUS Cited Publication)

  36. M.C. Yew, N.H. Ramli Sulong, M.K. Yew, M.A. Amalina, M.R. Johan,Influences of flameretardant fillers on fire protection and mechanical properties of intumescent coatings, Progress In Organic Coatings, 78(2015), 59-66. (ISI-Cited Publication)

  37. M.C. Yew, N.H. Ramli Sulong, M.K. Yew, M.A. Amalina, M.R. Johan, Eggshells: A novel biofiller for intumescent flame retardant coatings, Progress In Organic Coatings, 81(2015), 116-124. (ISI-Cited Publication)

  38. Shah, S.N.R., Sulong, N.H.R., Shariati, M., & Jumaat, M.Z. (2015). Steel Rack Connections: Identification of Most Influential Factors and a Comparison of Stiffness Design Methods. PLoS ONE. 10(10): e0139422. doi:10.1371/journal.pone.0139422: pp. 1-19. (ISI-Cited Publication)

  39. Leong Siong Hean, N.H. Ramli Sulong, Mohammed Jameel,Effect of Axial restraints on TopSeat Angle Connections at Elevated Temperatures, KSCE Journal of Civil Engineering, 2015, DOI 10.1007/s12205-015-1129-y. (ISI-Cited Publication)

  40. Khorramian K, Maleki S, Shariati M, Ramli Sulong NH (2015) Behavior of Tilted Angle Shear Connectors. PLoS ONE 10(12): e0144288. doi:10.1371/journal.pone.0144288 (ISI-Cited Publication)

  41. Shah, S.N.R., Sulong, N.H.R., Khan, R., Jumaat, M.Z., & Shariati, M. (2016). Behavior of Industrial Steel Rack Connections. Mechanical Systems and Signal Processing. 70-71: pp. 725740. (ISI-Cited Publication)

  42. Shariati M, Ramli Sulong N. H, Shariati A, Arabnejad Khanouki M. M. Behavior of V-shaped angle shear connectors: Experimental and parametric study. Article in press, Materials and Structures. DOI: 10.1617/s11527-015- 0762-8 Springer, 2015. (ISI-Cited Publication)

  43. Khaled Ghaedi, Mohammed Jameel, Zainah Ibrahim, P.Khanzaei (2015) "Seismic Analysis of Roller Compacted Concrete (Rcc) Dams Considering Effect of Sizes And Shapes Of Galleries" KSCE Journal of Civil Engineering, 20 (1), pp:261-272 (ISI-Cited Publication)

  44. Md. Alhaz Uddin , Mohammed Jameel, Hashim Abdul Razak (2015) "Application of artificial neural networks in fixed offshore structures" Indian Journal of Geo- Marine Sciences,Vol 44 (3) (ISI-Cited Publication)

  45. NB Khan, M Abid, M Jameel, HA Wajid (2015) Joint strength of gasketed bolted pipe flange joint under combined internal pressure plus axial load with different (industrial and ASME) boltup strategy, Journal Process Mechanical Engineering (ISI-Cited Publication)

  46. MH Gheryani, HA Razak, M Jameel (2015) Dynamic Response Changes of Seismic Isolated Building Due to Material Degradation of HDRB, Arabian Journal for Science and Engineering, 40 (12), 3429-3442 (ISI-Cited Publication)

  47. LS Hean, NHR Sulong, M Jameel (2015) Effect of axial restraints on top-seat angle connections at elevated temperatures, KSCE Journal of Civil Engineering, 1-9 (ISI-Cited Publication)

  48. Zaki A., Chai H.K., Aggelis D.G. and Alver N., "Non- destructive evaluation for corrosion monitoring in concrete: A review and capability of acoustic emission technique", Sensors, 2015, Vol. 15(8), pp. 19069- 19101. DOI: 10.3390/s150819069. (ISI/SCOPUS Cited Publication)

  49. Behnia A., Chai H.K., Ranjbar N. and Jumaat M.Z., "Damage detection of SFRC concrete beams subjected to pure torsion by integrating acoustic emission and Weibull damage function", Structural Control and Health Monitoring, Vol. 23(1), 2015, pp. 51-68. DOI: 10.1002/stc.1753. (ISI/SCOPUS Cited Publication)

  50. Panjehpour M., Chai H.K. and Voo L.Y., "Refinement of strut-and-tie model for reinforced concrete deep beams", PloS One, 2015 Jun 25;10(6):e0130734. (ISI/SCOPUS Cited Publication)

  51. Islam R., Lim K.S., Bagherifaez M. and Chai H.K., Tilted fiber Bragg grating sensors for reinforcement corrosion measurement in marine concrete structure , IEEE Transactions on Instrumentation and Measurements, Vol. 64(12), 2015, pp. 3510-3516. DOI: 10.1109/TIM.2015.2459511. (ISI/SCOPUS Cited Publication)

  52. Lee F.W., Chai H.K. and Lim K.S.,"Extraction of Rayleigh-waves for concrete cracks characterization based on matched filtering of center of energy", Journal of Sound and Vibration, Vol. 363, 2016, pp. 303-315. DOI: 10.1016/j.jsv.2015.11.004. (ISI/SCOPUS Cited Publication)

  53. M.hassani, Aidi MD. Saleh, M Suhatril and M. Safa.2015.Fuzzy modelling approach for shear strength prediction of RC deep beams. Smart Structures and Systems. An Int'l Journal Vol.16 No.3 (ISI-Cited Publication)

  54. M. Aghakhani, M. Suhatril, M. Mohammadhassani, M. Daie, and A. Toghroli. 2015. A Simple Modification of Homotopy Perturbation Method for the Solution of Blasius Equation in SemiInfinite Domains. Mathematical Problems in Engineering.Volume 2015, Article ID 671527 (ISI Cited Publication)



2014

  1. Ahmmad, R., Jumaat, M. Z., Bahri, S., and Islam, A. B. M. S. (2014). Ductility performance of lightweight concrete element containing massive palm shell clinker. Construction & Building Materials. 63, 234-241. (ISI/SCOPUS Cited Publication)

  2. Kim Hung Mo, Soon Poh Yap, U. Johnson Alengaram, Mohd Zamin Jumaat, Chun Hooi Bu.2014.Impact resistance of hybrid fibre-reinforced oil palm shell concrete. Construction and Building Materials, 50,499-507 (ISI/SCOPUS Cited Publication)

  3. Mazinani, I., Jumaat, M. Z., Ismail, Z., & Chao, O. Z. (2014). Comparison of shear lag in structural steel building with framed tube and braced tube. Structural Engineering and Mechanics, 49(3), 297-309. (ISI-Cited Publication)

  4. Wahab, M. J. A., & Jumaat, M. Z. (2014). Investigation of Linearity between Mechanical Properties of Wood Using Graphical Method. Sains Malaysiana, 43(2), 211- 218.

  5. Payam Shafigh, Hafez Ghafari, Hilmi Bin Mahmud, Mohd Zamin Jumaat. (2014). "A comparison study of the mechanical properties and drying shrinkage", Materials and Design, 60, 320-327 (ISI-Cited Publication)

  6. Islam, A., Alengaram, U. J., Jumaat, M. Z., & Bashar, I. I. (2014). The development of compressive strength of ground granulated blast furnace slag-palm oil fuel ash-fly ash based geopolymer mortar. Materials & Design, 56, 833-841. doi: 10.1016/j.matdes.2013.11.080 (ISI-Cited Publication)

  7. Islam, A. B. M. S., Ahmad, S. I., Jumaat M. Z., & Hussain R. R. (2014). Efficient Design in Building Construction with Rubber Bearing in Medium Risk Seismicity: Case Study & Assessment. Journal of Civil Engineering and Management. (ISI/SCOPUS Cited Publication)

  8. Mo, K. H., Yap, K. K. Q., Alengaram, U. J., & Jumaat, M. Z. (2014). The effect of steel fibres on the enhancement of flexural and compressive toughness and fracture characteristics of oil palm shell concrete. Construction and Building Materials, 55, 20-28. doi: 10.1016/j.conbuildmat.2013.12.103 (ISI-Cited Publication)

  9. Islam, A. B. M. S., Hussain, R. R., and Jumaat, M. Z. (2014). Implication of rubber-steel bearing nonlinear models on soft storey structures. Computers and Concrete.

  10. Liu, M. Y. J., Chua, C. P., Alengaram, U. J., & Jumaat, M. Z. (2014). Utilization of Palm Oil Fuel Ash as Binder in Lightweight Oil Palm Shell Geopolymer Concrete. Advances in Materials Science and Engineering, 6. doi: 10.1155/2014/610274 (ISI-Cited Publication)

  11. Kamruzzaman, M., Jumaat, M. Z., Sulong, N. H. R., and Islam, A. B. M. S. (2014). A Review on Strengthening Steel Beams using FRP under Fatigue. The Scientific World Journal. Vol. 2014 (ISI/SCOPUS Cited Publication)

  12. Ahmmad, R., Jumaat, M. Z., Bahri, S. & Islam A. B. M. S. (2014). Effect of water-cement ratios on oil palm shell (OPS) lightweight concrete for ecofriendly construction. International Journal of Advances in Computer Science and Its Applications, 4(4), 246-249. (Non-ISI/Non-SCOPUS Cited Publication)

  13. A.M.Zain, M.G.Shaaban and H.Mahmud. The effect of cement replacement materials to the hydration of petroleum sludge in OPC. Key Engineering Materials, Vol. 594-595, 2014, pp 385-389 (Scopus Indexed) (SCOPUS-Cited Publication)

  14. A.M.Zain, M.G.Shaaban and H.Mahmud. Leachability of metal ions in TCLP leachate of soilidified petroleum sludge. Key Engineering Materials, Vol. 594-595, 2014, pp 1094-1098 (SCOPUS-Cited Publication)

  15. H.B.Mahmud, P.Shafigh and M.Z.Jumaat. Structural lightweight aggregate concrete containing high volume waste materials. Key Engineering Materials, Vol. 594-595, 2014, pp 498-502 (SCOPUS-Cited Publication)

  16. S Salleh, MG Shaaban, HB Mahmud, J Kang and KT Looi, Production of bricks from shipyard repair and maintenance hazardous waste , International Journal of Environmental Science and Development, Vol. 5 Issue 1, February 2014, pp 52-56

  17. P.Shafigh, H.B.Mahmud, M.Z.Jumaat and M.Zargar. Agricultural wastes as aggregate in concrete mixtures A review, Construction and Building Materials, Vol. 53, 2014, pp 110-117 (ISI Indexed Journal) (ISI-Cited Publication)

  18. S.Koting, M.R.Karim, H.Mahmud, N.S.Mashaan, M.R.Ibrahim, H.Katman and N.Husain., Effects of using silica fume and polycarboxylate-type superplasticizer on physical properties of cementitious grout mixtures for semi-flexible pavement surfacing , The Scientific World Journal, Vol. 2014, Article ID 596364, 7 pages, 2014 (ISI Indexed Journal) (ISI-Cited Publication)

  19. N.Husain, M.R.Karim, H.B.Mahmud and S.Koting., Effects of aggregate gradation on the physical properties of semi-flexible pavement, Advances in Materials Science and Engineering, V2014, Article ID 529305, 2014, 8 pages (ISI Indexed Journal) (ISI-Cited Publication)

  20. Gorjinia, P.Shafigh, M. Moghimi and H.B.Mahmud, The role of 0-2mm fine recycled concrete aggregate (RCA) on the compressive and splitting tensile strengths of RCA concrete, Materials and Design Vol. 64, pp 345- 354 (Available Online 26 August 2014) (ISI-Cited Publication)

  21. M.K.Yew, H.Mahmud, B.C.Ang and M.C.Yew., Effects of oil palm shell coarse aggregate species on high strength lightweight concrete, The Scientific World Journal Vol 2014 Article ID 387647, 12 pages (ISI-Cited Publication)

  22. P.Shafigh, H.Ghafari, H.B.Mahmud and M.Z.Jumaat, A comparison study of the mechanical properties and drying shrinkage of oil palm shell and expanded clay lightweight aggregate concretes, Materials and Design, Vol 60, 2014, pp 230-237 (ISI Indexed Journal) (ISI-Cited Publication)

  23. M.Hassanpour, P.Shafigh and H.B.Mahmud,, Mechanical properties of structural lightweight aggregate concrete containing low volume steel fiber, Arabian Journal for Science and Engineering Vol. 39 No.5, May 2014, pp 3579- 3590 (ISI Indexed Journal) (ISI-Cited Publication)

  24. Asna Mohd Zain, Md Ghazaly Shaaban and Hilmi Mahmud (2014). Leachability of Solidified Petroleum Sludge. Advanced Materials Research, Vol. 917, pp 123-133. (SCOPUS-Cited Publication)

  25. P.Shafigh, H.B.Mahmud, M.Z.Jumaat, R.Ahmmad and S.Bahri. Structural lightweight aggregate concrete using two types of waste from the palm oil industry as aggregate. Journal of Cleaner Production Vol 80 2014, pp 187-196 (ISI-Cited Publication)

  26. S.Koting, M.R.Karim, H.B.Mahmud and N.A.A.Hamid., Mechanical properties of cement-bitumen composites for semi-flexible pavement surfacing , The Baltic Journal of Road and Bridge Engineering Volume 9 Issue 3 2014, pp 191-199 (ISI-Cited Publication)

  27. M.K. Yew, H.B.Mahmud, B.C. Ang and M.C.Yew. Effects of heat treatment on oil palm shell coarse aggregates for high strength lightweight concrete. Materials and Design, Vol. 54, 2014, pp 702-707 (ISI Indexed Journal) (ISI-Cited Publication)

  28. Kim Hung Mo, Soon Poh Yap, U. Johnson Alengaram, Mohd Zamin Jumaat, Chun Hooi Bu.2014.Impact resistance of hybrid fibre-reinforced oil palm shell concrete. Construction and Building Materials, 50,499-507 (ISI/SCOPUS Cited Publication)

  29. Ranjbar, N., Mehrali, M., Behnia, A., Alengaram, U. J., & Jumaat, M. Z. (2014). Compressive strength and microstructural analysis of fly ash/palm oil fuel ash based geopolymer mortar. Materials & Design, 59, 532-539 [SCOPUS/ ISI] (ISI-Cited Publication)

  30. Ranjbar, N., Mehrali, M., Alengaram, U. J., Metselaar, H. S. C., Jumaat, M. Z. 2014. Compressive strength and microstructural analysis of fly ash/palm oil fuel ash based geopolymer mortar under elevated temperatures Construction and Building Materials (ISI-Cited Publication)

  31. Chen, Y., Visintin, P., Oehlers, D. J., Alengaram, U. J. 2014. Size-Dependent Stress-Strain Model for Unconfined Concrete Journal of Structural Engineering (ISI-Cited Publication)

  32. Bashar, II, Alengaram, U. J., Jumaat, M. Z., Islam, A. 2014. The Effect of Variation of Molarity of Alkali Activator and Fine Aggregate Content on the Compressive Strength of the Fly Ash: Palm Oil Fuel Ash Based Geopolymer Mortar Advances in Materials Science and Engineering (ISI-Cited Publication)

  33. Islam, A., Alengaram, U. J., Jumaat, M. Z., Bashar, II 2014. The development of compressive strength of ground granulated blast furnace slag-palm oil fuel ash-fly ash based geopolymer mortar Materials Design (ISI-Cited Publication)

  34. Mo, K. H., Yap, K. K. Q., Alengaram, U. J., Jumaat, M. Z. 2014. The effect of steel fibres on the enhancement of flexural and compressive toughness and fracture characteristics of oil palm shell concrete Construction and Building Materials (ISI-Cited Publication)

  35. Sayadi, A. A., Abd Rahman, A. B., Bin Jumaat, M. Z., Alengaram, U. J., Ahmad, S. 2014. The relationship between interlocking mechanism and bond strength in elastic and inelastic segment of splice sleeve Construction and Building Materials (ISI-Cited Publication)

  36. Qeshta, I. M. I., Shafigh, P., Jumaat, M. Z., Abdulla, A. I., Ibrahim, Z., Alengaram, U. J. 2014. The use of wire mesh-epoxy composite for enhancing the flexural performance of concrete beams Materials Design (ISI-Cited Publication)

  37. Mo, K. H., Yap, K. K. Q., Alengaram, U. J., & Jumaat, M. Z. (2014). The effect of steel fibres on the enhancement of flexural and compressive toughness and fracture characteristics of oil palm shell concrete. Construction and Building Materials, 55, 20-28. doi: 10.1016/j.conbuildmat.2013.12.103 (ISI-Cited Publication)

  38. Islam, A., Alengaram, U. J., Jumaat, M. Z., & Bashar, I. I. (2014). The development of compressive strength of ground granulated blast furnace slag-palm oil fuel ash-fly ash based geopolymer mortar. Materials & Design, 56, 833-841. doi: 10.1016/j.matdes.2013.11.080 (ISI-Cited Publication)

  39. Liu, M. Y. J., Chua, C. P., Alengaram, U. J., & Jumaat, M. Z. (2014). Utilization of Palm Oil Fuel Ash as Binder in Lightweight Oil Palm Shell Geopolymer Concrete. Advances in Materials Science and Engineering, 6. doi: 10.1155/2014/610274 (ISI-Cited Publication)

  40. KH Mo, UJ Alengaram, MYJ Liu, MZ Jumaat. Permeation Properties of Lightweight Oil Palm Shell Concrete. Australian Journal of Basic & Applied Sciences 8 (19) (Non-ISI/Non-SCOPUS Cited Publication)

  41. MYJ Liu, UJ Alengaram, SP Yap, MZ Jumaat.Utilization of Oil Palm Shell as Lightweight Aggregate in Lightweight-Foamed Concrete. Australian Journal of Basic & Applied Sciences 8 (19) (Non-ISI/Non-SCOPUS Cited Publication)

  42. B Alsubari, P Shafigh, MZ Jumaat, UJ Alengaram. Palm Oil Fuel Ash as a Partial Cement Replacement for Producing Durable Self-consolidating High-Strength Concrete. Arabian Journal for Science and Engineering 39 (12), 8507-8516 (ISI-Cited Publication)

  43. KH Mo, UJ Alengaram, MZ Jumaat, SP Yap. Feasibility study of high volume slag as cement replacement for sustainable structural lightweight oil palm shell concrete. Journal of Cleaner Production (ISI-Cited Publication)

  44. KH Mo, UJ Alengaram, MZ Jumaat.A Review on the Use of Agriculture Waste Material as Lightweight Aggregate for Reinforced Concrete Structural Members. Advances in Materials Science and Engineering 2014 (ISI-Cited Publication)

  45. RH Kupaei, UJ Alengaram, MZ Jumaat. The Effect of Different Parameters on the Development of Compressive Strength of Oil Palm Shell Geopolymer Concrete. The Scientific World Journal 2014 (ISI/SCOPUS Cited Publication)

  46. Alsubari, B., Shafigh, P., Jumaat, M. Z., & Alengaram, U. J. (2014, August). The Effect of Palm Oil Fuel Ash as a Cementreplacement Material on Self-Compacting Concrete. In Applied Mechanics and Materials (Vol. 567, pp. 529-534).

  47. Mo, K. H., Alengaram, U. J., & Jumaat, M. Z. Utilization of ground granulated blast furnace slag as partial cement replacement in lightweight oil palm shell concrete. Materials and Structures, 1-12. (ISI/SCOPUS Cited Publication)

  48. Qeshta, I. M., Shafigh, P., Jumaat, M. Z., Abdulla, A. I., Alengaram, U. J., & Ibrahim, Z. (2014, August). Flexural Behaviour of Concrete Beams Bonded with Wire Mesh-Epoxy Composite. Applied Mechanics and Materials (Vol. 567, pp. 411-416). (SCOPUS-Cited Publication)

  49. M.C. Yew, N.H. Ramli Sulong, M.K. Yew, M.A. Amalina, M.R. Johan, Fire Propagation Performance of Intumescent Fire Protective Coatings Using Eggshells as a Novel Biofiller, The Scientific World Journal, 2014. (SCOPUS-Cited Publication)

  50. Fatigue energy dissipation and failure analysis of angle shear connectors embedded in high strength concrete, Mahdi Shariati, Ali Shariati, N.H. Ramli Sulong, Meldi Suhatril, M.M. Arabnejad Khanouki, Engineering Failure Analysis, Volume 41, June 2014, Pages 124-134 (ISI-Cited Publication)

  51. Shariati, A., Shariati, M., Ramli Sulong, N.H., Suhatril, M., Arabnejad Khanouki, M.M., Mahoutian, M. Experimental assessment of angle shear connectors under monotonic and fully reversed cyclic loading in high strength concrete (2014) Construction and Building Materials 52 PP. 276 - 283 (ISI-Cited Publication)

  52. M.C. Yew, N.H. Ramli Sulong, M.K. Yew, M.A. Amalina, M.R. Johan, Investigation on solvent-borne intumescent flame-retardant coatings for steel, Materials Research Innovations, vol. 18, 2014. (ISI-Cited Publication)

  53. Mohamed Kamruzzaman, Mohd Zamin Jumaat, N. H. Ramli Sulong, and A. B. M. Saiful Islam, A Review on Strengthening Steel Beams Using FRP under Fatigue, The Scientific World Journal Volume 2014, Article ID 702537, 21 pages (ISI-Cited Publication)

  54. Qeshta I.M.I., Shafigh P., Jumaat M.Z., Abdulla A.I., Alengaram U.J. and Ibrahim Z. (2014), Flexural Behaviour of Concrete Beams Bonded with Wire Mesh-Epoxy Composite, Applied Mechanics and Materials, Vol. 567, pp 411-416. DOI:10.4028/www.scientific.net/AMM.567.411 (SCOPUS-Cited Publication)

  55. Kamarudin, A. F., Daud, M. E., Ibrahim, Z., Ibrahim, A., Yub, M. K. and Mohd Noor, M. A. (2014), Estimation of Site Dynamic Characteristics from Ambient Noise Measurements Using HVSR Method in Microzonation Study: Senggarang, Batu Pahat, Malaysia, Advanced Materials Research, Vols. 931-932, pp. 803-807. DOI 10.4028/www.scientific.net/AMR.931-932.803 (SCOPUS-Cited Publication)

  56. Kamarudin, A. F., Daud, M. E., Ibrahim, A., Ibrahim, Z. and Koh, H. B. (2014), Dynamic Characteristics of Site and Existing Low-Rise RC Building for Seismic Vulnerability Assessment, North Atlantic University Union (NAUN) Journal, International Journal of Geology, Vol. 8, pp. 28-38, ISSN: 1998-4499. (SCOPUS-Cited Publication)

  57. Kamarudin, A. F., Ibrahim, A., Ibrahim, Z., Madun, A. and Daud, M. E. (2014), Vulnerability Assessment of Existing Low-Rise Reinforced Concrete School Buildings in Low Seismic Region using Ambient Noise Method, Advanced Materials Research, Vols. 931-932, pp 483-489. DOI 10.4028/www.scientific. net/AMR.931-932.483 (SCOPUS-Cited Publication)

  58. Qeshta I.M.I., Shafigh P., Jumaat M.Z., Abdulla A.I., Ibrahim Z. and Alengaram U.J. (2014), The use of Wire Mesh Epoxy Composite for Enhancing the Flexural Performance of Concrete Beams, Materials & Design, Vol. 60, pp. 250-259 (ISI-Cited Publication)

  59. Toghroli, A., Mohammadhassani, M., Shariati, M., Suhatril, M., Ibrahim, Z. and Sulong, N. H. R. (2014). Prediction of shear capacity of channel shear connectors using the ANFIS model. Steel and Composite Structures, An Int'l Journal Vol. 17, No. 5, 623-639. (ISI-Cited Publication)

  60. Zaki A., Chai H.K., Razak H.A., Shiotani T., "Monitoring and evaluating stability of soil slopes: a review on various available methods and feasibility of acoustic emission technique", Comptes Rendus Geoscience, Vol. 346, 2014, pp.223-232. (ISI/SCOPUS Cited Publication)

  61. Chai H.K., Abeer A.M. and Allawi A.A, "Torsional analysis of multi-cell RC box girders strengthened with CFRP using modified softened truss model", ASCE Journal of Bridge Engineering, 10.1061/(ASCE)BE.1943- 5592.0000621 , B4014001. (ISI/SCOPUS Cited Publication)

  62. Liu K. F., Chai H. K., Mehrabi N., Kobayashi Y. and Shiotani T., "Condition assessment of PC tendon duct filling by elastic wave velocity mapping", The Scientific World Journal, Vol. 2014, Article ID 194295, 14 pages, http://dx.doi.org/10.1155/2014/194295. (ISI/SCOPUS Cited Publication)

  63. Mpalaskas M., Vasilakos I., Matikas T.E., Aggelis D.G. and Chai H.K., "Monitoring of the fracture mechanisms induced by pull-out and compression in concrete", Engineering Fracture Mechanics, Vol.128, 2014, pp. 219-230. (ISI/SCOPUS Cited Publication)

  64. Lee F.W., Chai H. K. and Tan T. H. "Feasibility study on evaluating surface-opening cracks in concrete by multi-channel instrumented Rayleigh wave propagation", Advances in Structural Engineering, Vol. 7(6), 2014, pp. 785-799. (ISI/SCOPUS Cited Publication)

  65. Panjehpour M., Chai H.K. and Voo Y.L., "Effect of CFRP- strengthening on strut deformation in reinforced concrete deep beams", The Scientific World Journal, Volume 2014, Article ID 265879, 9 pages http://dx.doi.org/10.1155/2014/265879 (ISI/SCOPUS Cited Publication)

  66. Behnia A., Chai H.K., Yorikawa M., Momoki S., Terazawa M. and Shiotani T., "Integrated non-destructive assessment of concrete structures under flexure by acoustic emission and travel time tomography", Construction and Building Materials, Volume 67, Part B, 2014, Pages 202 215. (ISI/SCOPUS Cited Publication)

  67. Bagherifaez M., Behnia A., Majeed A. and Chai H.K., "Acoustic emission monitoring of multi-cell reinforced concrete box girders subjected to torsion", The Scientific World Journal, Volume 2014, Article ID 567619, 13 pages, http://dx.doi.org/10.1155/2014/567619 (ISI/SCOPUS Cited Publication)

  68. Behnia, H.K. Chai,M. BagheriFaez and T. Shiotani, "Advanced structural health monitoring of concrete structures with the aid of acoustic emission", Construction and Building Materials, Vol. 65, No. 29, pp. 282-302. (ISI/SCOPUS Cited Publication)

  69. Aggelis D.G., Alver N. and Chai H.K., "Health monitoring of civil infrastructure and materials", The Scientific World Journal, Volume 2014, Article ID 435238, 2 pages http://dx.doi.org/10.1155/2014/435238 (ISI/SCOPUS Cited Publication)

  70. M. Shariati, A.Shariati, N.H. Ramli Sulong, Meldi Suhatril and M.M.A. Khanouki.2014. Fatique energy dissipation and failure analysis of angle shear connectors embedded in high strength concrete. Engineering Failure Analysis. (ISI-Cited Publication)

  71. Shariati, A., Shariati, M., Ramli Sulong, N.H., Suhatril, M., Arabnejad Khanouki, M.M., Mahoutian, M. Experimental assessment of angle shear connectors under monotonic and fully reversed cyclic loading in high strength concrete (2014) Construction and Building Materials 52 PP. 276 - 283 (ISI-Cited Publication)

  72. M.Mohd hassani,S.Akib, M.Shariati, M.Suhatril, & M.M.A. Knouki.2014. An Experimental Study on the Failure Modes of High Strength Concrete Beams with Particular References to Variation of the Tensile Reinforcement Ratio. Engineering Failure Analysis(Q2). 41 (2014) 73-80. (ISI-Cited Publication)

  73. Koktong Tan, Hashim Abdul Razak,*, Meldi Suhatril, Dagang Lu. 2014.Fragility Curves of a RC Frame Building Subjected to Seismic Ground Motions.Journal of Civil Engineering Research. 4(3A): 159-163 (Non-ISI/Non-SCOPUS Cited Publication)

  74. Prediction of shear capacity of channel shear connectors using the ANFIS model.Steel and Composite Structures, Vol. 17, No. 5 (2014) 000-000 (ISI-Cited Publication)

  75. An evolutionary fuzzy modelling approach and comparison of different methods for shear strength prediction of high-strength concrete beams without stirrups.Smart Structures and Systems, Vol. 14, No. 5 (2014) 785-809 (ISI-Cited Publication)

  76. Adham, M.I., Shirazi, S.M., Faridah Othman, Rahman, S., Yusop, Z. & Ismail, Z. 2014. Runoff Potentiality of a Watershed through SCS and Functional Data Analysis Technique. The Scientific World Journal 2014: 1-15. (ISI-Cited Publication)

  77. Mohammed Seyam & Faridah Othman 2014. The Influence of Accurate Lag Time Estimation on the Performance of Stream Flow Data-driven Based Models. Water Resources Management 28. (ISI-Cited Publication)

  78. Faridah Othman, Alaa-Eldin, M.E., Siti Azireen, H.A. & Siti Asiah, M. 2014. Utilizing GIS in the development of water quality river modeling for Penchala River, Malaysia. Applied Mechanics and Materials 580-583: 2078- 2081 (SCOPUS-Cited Publication)

  79. Seyed Karim Fazlolahzade Sadati, Mohammad Heydari, Nasrolah Javaheri and Faridah Othman(2014). Water Yield Estimation in Polrudwatershed Based on Empirical Methods and Modelling in Geographic Information System (GIS). Journal of River Engineering, Volume2 Issue 7 2014

  80. Faridah Othman, Md.Sadek Uddin Chowdhury and Nobumitsu Sakai. Assessment of microorganism pollution of Selangor River, Malaysia. International Journal of Advances in Agricultural & Environmental Engineering(IJAAEE) Vol. 1, Issue 2(2014) ISSN 2349- 1523 EISSN 2349-1531

  81. Faridah Othman, Mohammad Heydari, Mohammad Sadegh Sadeghian, Mahmoud Rashidi and Mahdi Shahiri Parsa(2014). "The Necessity of Systematic and Integrated Approach in Water Resources Problems and Evaluation Methods, a Review". Advances in Environmental Biology,8(19)Special 2014, Pages:307- 315.

  82. Shirazi S.M., Zardani M.H., Yusop, Z, Ismail, Z., Othman F. (2014) Performance of wheat crop under different irrigation regimes and nitrogen levels. A Field Experiment. Journal of Environmental protection and ecology. 15: 973-982 (ISI-Cited Publication)



2013

  1. Islam, A. B. M., Jameel, M., Ahmad, S., Jumaat, M. Z., and Kurian, V.J. (2013) Structural behaviour of fully coupled spar-mooring system under extreme wave loading. Journal of Civil Engineering and Management, (Accepted, Q1 category) (ISI-Cited Publication)

  2. Shafigh, P., Jumaat, M. Z., Bin Mahmud, H., & Alengaram, U. J. (2013). Oil palm shell lightweight concrete containing high volume ground granulated blast furnace slag. Construction and Building Materials, 40, 231-238. (ISI-Cited Publication)

  3. Fun, T. S., & Jumaat, M. Z. (2013). Comparison of European standard EN 310 and EN 789 in determining the bending strength and modulus of elasticity of red seraya (Shorea spp.) plywood panel: experimental and finite element analysis. European Journal of Wood and Wood Products, 71(4), 483-490.

  4. Chahkand, N. A., Jumaat, M. Z., Sulong, N. H. R., Zhao, X. L., & Mohammadizadeh, M. (2013). Experimental and theoretical investigation on torsional behaviour of CFRP strengthened square hollow steel section. Thin-Walled Structures, 68, 135-140.

  5. Mohammadhassani, M., Nezamabadi-Pour, H., Jumaat, M. Z., Jameel, M., & Arumugam, M. S. (2013). Application of artificial neural networks (ANNs) and linear regressions (LR) to predict the deflection of concrete deep beams. Computers and Concrete, 11(3), 237-252. (ISI-Cited Publication)

  6. Islam, A. B. M. S., Hussain, R. R., Jumaat, M. Z., & Rahman, M. A. (2013). Nonlinear dynamically automated excursions for rubber-steel bearing isolation in multi- storey construction. Automation in Construction, 30, 265-275.

  7. Hassan, A., Bin Mahmud, H., Jumaat, M. Z., ALsubari, B., & Abdulla, A. (2013). Effect of Magnesium Sulphate on Self-Compacting Concrete Containing Supplementary Cementitious Materials. Advances in Materials Science and Engineering.

  8. Islam, A. B. M. S., Jameel, M., Jumaat, M. Z., & Rahman, M. M. (2013). Optimization in Structural Altitude for Seismic Base Isolation at Medium Risk Earthquake Disaster Region. Disaster Advances, 6(1), 23-34.

  9. Shafigh, P., Alengaram, U. J., Bin Mahmud, H., & Jumaat, M. Z. (2013). Engineering properties of oil palm shell lightweight concrete containing fly ash. Materials & Design, 49, 613-621. doi: DOI 10.1016/j.matdes.2013.02.004 (ISI-Cited Publication)

  10. Jameel, M., Ahmad, S., Islam, A. B. M. S., & Jumaat, M. Z. (2013). Non-Linear Dynamic Analysis of Coupled Spar Platform. Journal of Civil Engineering and Management, 19(4), 476-491. doi: Doi 10.3846/13923730.2013.768546

  11. Mohammadhassani, M., Nezamabadi-Pour, H., Jumaat, M., Jameel, M., Hakim, S. J. S., & Zargar, M. (2013). Application of the ANFIS model in deflection prediction of concrete deep beam. Structural Engineering and Mechanics, 45(3), 323-336.

  12. N. Abdollahi Chahkand, M. Zamin Jumaat, N.H. Ramli Sulong, X.L. Zhao, M.R. Mohammadizadeh. 2013. Experimental and theoretical investigation on torsional behaviour of CFRP strengthened square hollow steel section. Thin-Walled Structures, 68: 135-140. (ISI-Cited Publication)

  13. M.Hassanpour, P.Shafigh and H.B.Mahmud,, Mechanical properties of structural lightweight aggregate concrete containing low volume steel fiber , Arabian Journal for Science and Engineering (ISI Indexed Journal), (Accepted for publication April 2013)(Ref: AJSE-D-12-02221R2) (ISI-Cited Publication)

  14. P.Shafigh, U.J.Alengaram, H.B.Mahmud and M.Z.Jumaat., Engineering properties of oil palm shell lightweight concrete containing fly ash ., Materials and Design, Vol 49, Aug 2013, pp 613-621 (ISI Indexed Journal) (Online 15 March 2013) (ISI-Cited Publication)

  15. Payam Shafigh, U. Johnson Alengaram, Hilmi Bin Mahmud, Mohd Zamin Jumaat. 2013.Engineering properties of oil palm shell lightweight concrete containing fly ash. Materials and Design 49: 613 621 (ISI-Cited Publication)

  16. S.Koting, M.R.Karim, H.B.Mahmud and N.B.A.A.Hamid., Mechanical properties of cement-bitumen composites for semi-flexible pavement surfacing , Paper accepted for publication in Baltic Journal of Road and Bridge Engineering (ISI Indexed Journal)(Accepted January 2013) (ISI-Cited Publication)

  17. P.Shafigh, H.B.Mahmud, M.Z.Jumaat and M.Zargar. Agricultural wastes as aggregate in concrete mixtures A review, Paper accepted for publication in Construction and Building Materials (ISI Indexed Journal) (Accepted November 2013) (Ref: CONBUILDMAT-D-13-02195) (ISI-Cited Publication)

  18. Shafigh, P., Jumaat, M. Z., Bin Mahmud, H., & Alengaram, U. J. (2013). Oil palm shell lightweight concrete containing high volume ground granulated blast furnace slag. Construction and Building Materials, 40, 231-238. (ISI-Cited Publication)

  19. Hassan, A., Bin Mahmud, H., Jumaat, M. Z., ALsubari, B., & Abdulla, A. (2013). Effect of Magnesium Sulphate on Self-Compacting Concrete Containing Supplementary Cementitious Materials. Advances in Materials Science and Engineering.

  20. N.Husain, M.R.Karim, H.B.Mahmud and S.Koting., Effects of aggregate gradation on the physical properties of semi-flexible pavement, Paper accepted for publication in Advanced Materials Science and Engineering, (ISI Indexed Journal), (Accepted October 2013) (ISI-Cited Publication)

  21. S.Koting, M.R.Karim, H.Mahmud, N.S.Mashaan, M.R.Ibrahim, H.Katman and N.Husain. Effects of using silica fume and polycarboxylate-type superplasticizer on physical properties of cementitious grout mixtures for semi-flexible pavement surfacing. Paper accepted for publication in The Scientific World Journal, (ISI Indexed Journal), (Manuscript No: 596364 - Accepted October 2013) (ISI-Cited Publication)

  22. M.K. Yew, H.B.Mahmud, B.C.Ang and M.C.Yew., Effects of heat treatment on oil palm shell coarse aggregates for high strength lightweight concrete, Materials and Design (ISI Indexed Journal), (Accepted for publication August 2013)(Available Online 4 September 2013) (ISI-Cited Publication)

  23. A.Hassan, H.B.Mahmud, M.Z.Jumaat, B. Al Subari and A.Abdulla., Effect of magnesium sulphate in self compacting concrete containing supplementary cementitious materials, Advances in Materials Science and Engineering, Vol. 2013, 2013, Article ID 232371, 8 pages (ISI-Cited Publication

  24. Huzaifa Hashim, Zainah Ibrahim, Hashim Abdul Razak (2013), Dynamic Characteristics and Model Updating of Damaged Slab From Ambient Vibration Measurements, Measurement, 46(4), pp. 1371-1378. ISSN 02632241,10.1016/j.measurement.2012.11.043.

  25. Luo, D., Ibrahim, Z., Yang, H and Ismail, Z. (2013), Use of Tapered Optical Fiber Sensors in Study of the Hydration Process of Cement Paste, IEEE Sensors Journal, 3(9):3415-3420. (ISI-Cited Publication)

  26. Lou, D., Ismail, Z. and Ibrahim, Z. (2013). Added advantages in using a fiber Bragg grating sensor in the determination of early age setting time for cement pastes, Measurement, 46(10), 4313-4320. (ISI-Cited Publication)

  27. Luo, D., Ibrahim, Z., Ismail, Z. and Xu, B. (2013), Optimization of the Geometries of Biconical Tapered Fiber Sensors for Monitoring the Early-Age Curing Temperatures of Concrete Specimens,Computer-Aided Civil and Infrastructure Engineering, 28(7):531-541 (ISI-Cited Publication)

  28. Kupaei, RH, Alengaram UJ*, Jumaat MZ.2013. Mix design for fly ash based oil palm shell geopolymer lightweight concrete. Construction and Building Materials. Vol. 43 490-496 (ISI-Cited Publication)

  29. Yap, S.P., Alengaram, U.J., Jumaat, M.Z.,2013. The effect of aspect ratio and volume fraction on the mechanical properties of steel fiber-reinforced oil palm kernel shell concrete , Journal of Civil Engineering & Management (accepted for publication) (ISI-Cited Publication)

  30. Yap, S.P., Alengaram, U.J. & Jumaat, M.Z. 2013. Enhancement of mechanical properties in polypropylene and nylon fibre reinforced oil palm shell concrete. Materials and Design. Vol. 43, pp. 1034-1041. (ISI-Cited Publication)

  31. Payam Shafigh, U. Johnson Alengaram, Hilmi Bin Mahmud, Mohd Zamin Jumaat. 2013.Engineering properties of oil palm shell lightweight concrete containing fly ash. Materials and Design 49: 613 621 (ISI-Cited Publication)

  32. Shafigh, P., Jumaat, M. Z., Bin Mahmud, H., & Alengaram, U. J. (2013). Oil palm shell lightweight concrete containing high volume ground granulated blast furnace slag. Construction and Building Materials, 40, 231-238. (ISI-Cited Publication)

  33. Shafigh, P., Alengaram, U. J., Bin Mahmud, H., & Jumaat, M. Z. (2013). Engineering properties of oil palm shell lightweight concrete containing fly ash. Materials & Design, 49, 613-621. (ISI-Cited Publication)

  34. Alengaram, U.J., B.A. Muhit, Jumaat, M.Z. A comparison of the thermal conductivity of oil palm shell foamed concrete with conventional materials. Materials and Design 51 (2013) 522 529 (ISI-Cited Publication)

  35. Mahdi Shariati, N. H. Ramli Sulong, Meldi Suhatril, Ali Shariati and M. M. Arabnejad. K." Comparison of behaviour between channel and angle shear connectors under monotonic and fully reversed cyclic loading , Construction & Building Materials (Q1), 38 (2013), 582- 593. (ISI-Cited Publication)

  36. N. Abdollahi Chahkand, M. Zamin Jumaat, N.H. Ramli Sulong, X.L. Zhao, M.R. Mohammadizadeh. 2013. Experimental and theoretical investigation on torsional behaviour of CFRP strengthened square hollow steel section. Thin-Walled Structures, 68: 135-140. (ISI-Cited Publication)

  37. Mehrtash Soltani, Taher Baghaee Moghaddam, Mohamed Rehan Karim, N.H. Ramli Sulong, Analysis of developed transition road safety barrier systems, Accident Analysis and Prevention, 59 (2013), 240-252. (ISI-Cited Publication)

  38. (SCI-Q1: Top 10%) - M.C. Yew, N.H. Ramli Sulong, W.T. Chong, S.C. Poh, B.C. Ang, K.H. Tan. 2013. Integration of thermal insulation coating and moving- air-cavity in a cool roof system for attic temperature reduction. Energy Conversion and Management. 75:241-248. http://dx.doi.org/10.1016/j.enconman.2013.06.024 (ISI/SCOPUS Cited Publication)

  39. H.A. Mosalman Yazdi, N.H. Ramli Sulong, Genetic algorithm in locating the optimum mid-connection of Off-Centre braced system, Structure and Infrastructure Engineering, Voi. 9 (10), 2013, p 1040-1049. (ISI-Cited Publication)

  40. Mehrtash Soltani, Taher Baghaee Moghaddam, Mohamed Rehan Karim, N. H. Ramli Sulong, The safety performance of guardrail systems: review and analysis of crash tests data, International Journal of Crashworthiness (2013), DOI: 10.1080/13588265.2013.815020. (ISI-Cited Publication)

  41. M.C. Yew, N.H. Ramli Sulong, M.K. Yew, M.A. Amalina, M.R. Johan, The formulation and study of the thermal stability and mechanical properties of an acrylic coating using chicken eggshell as a novel bio-filler, Progress in Organic Coating 76(2013), 1549-1555. (ISI-Cited Publication)

  42. Islam, A. B. M., Jameel, M., Ahmad, S., Jumaat, M. Z., and Kurian, V.J. (2013) Structural behaviour of fully coupled spar-mooring system under extreme wave loading. Journal of Civil Engineering and Management, (Accepted, Q1 category) (ISI-Cited Publication)

  43. Jameel, M., Ahmad, S., Islam, A. B. M., and Jumaat, M. Z.,(2013) Nonlinear dynamic analysis of coupled spar platform Journal of Civil Engineering and Management,

  44. Jameel, M., Islam, A. B. M., Khaleel, M., and Ahmad, A. A. (2013) Efficient three dimensional modeling of high-rise building Journal of Civil Engineering and Management, (Accepted, Q1 category) (ISI-Cited Publication)

  45. Jameel, M., Islam, A.B.M.S., Hussain,R.R., and Khaleel, M. And Zaheer M. (2012) Optimum Structural Modelling for Tall Buildings. The Structural Design of Tall and Special Buildings, [10.1002/tal.1004]. (Published, Q2 category) (ISI-Cited Publication)

  46. Islam, A. B. M. S., Jameel, M., & Jumaat, M. Z. & Rahman M. M. (2013). Optimization in Structural Altitude for Seismic Base Isolation at Medium Risk Earthquake Disaster Region. Disaster Advances.Vol. 6(1),pp. 23-34 (ISI-Cited Publication)

  47. Uddin, M. A., Jameel, M., Sobuz, H. R.,Islam, M. S.( 2013). Experimental study on strength gaining characteristics of composite cement concrete. KSCE Journal of Civil Engineering, 17(4):1-8 (ISI-Cited Publication). (ISI-Cited Publication)

  48. Mohammadhassani. M, Jumaat M.Z, Nezamabadi-pour H, Jameel, Arul M S Arumugam. (2013) Application of artificial neural network (ANN) and linear regressions (LR) in predicting the deflection of concrete deep beams . Computer and concrete.,11(3), pp. 237-252. ISI cited (ISI-Cited Publication)

  49. Mohammadhassani. M, Jumaat M.Z, Nezamabadi-pour H, Jameel, Arul M S Arumugam.(2013) APPLICATION OF THE ANFIS MODEL IN DEFLECTION PREDICTION OF CONCRETE DEEP BEEM . Engineering structure and mechanics, Vol. 45, No.3, pp. 319-332 (ISI-Cited Publication)

  50. Momoki S., Shiotani T., Chai H. K., Aggelis D. G. and Kobayashi Y. "Large-scale evaluation of concrete repair by three-dimensional elastic-wave based visualization technique", Structural Health and Monitoring, Vol 12(3), 2013, pp.241-252. (ISI/SCOPUS Cited Publication)

  51. Zaki A., Chai H.K., Razak H.A., Shiotani T., "Monitoring and evaluating stability of soil slopes: a review on various available methods and feasibility of acoustic emission technique", Comptes Rendus Geoscience (under review) (ISI/SCOPUS Cited Publication)

  52. Allawi A.A, Abeer A.M., Chai H.K., "Torsional analysis of multi-cell RC box girders strengthened with CFRP using modified softened truss model", Engineering Structures (Under review) (ISI/SCOPUS Cited Publication)

  53. Behnia A., Chai H.K., Ranjbar N., "Finite element analysis of dynamic response of FRP composite floor subjected to walking induced vibrations , Advances in Structural Engineering (Accepted) (ISI/SCOPUS Cited Publication)

  54. Abeer A. M., Allawi A. A. and Chai H. K., "Theoretical study on torsional strengthening of multi-cell RC box girders", International Journal of Civil Science and Engineering, Vol.

  55. Mahdi Shariati, N. H. Ramli Sulong, Meldi Suhatril, Ali Shariati and M. M. Arabnejad. K." Comparison of behaviour between channel and angle shear connectors under monotonic and fully reversed cyclic loading , Construction & Building Materials (Q1), 38 (2013), 582- 593. (ISI-Cited Publication)

  56. Mohammad Mohammadhassani, Hossein Nezamabadipour, Meldi Suhatril & Mahdi Shariati. 2013. Identification of a suitable ANN architecture in Predicting Strain in Tie Section of Concrete Deep Beams. Structural Engineering and Mechanics 46(6): 853-868 (ISI-Cited Publication)

  57. Aminaton Marto, Tan Choy Soon*, Fauziah Kasim and Meldi Suhatril.2013.A Correlation of Shear Wave Velocity and Standard Penetration Resistance.EJGE 18/c: 463-471 (SCOPUS-Cited Publication)

  58. E.N. farsangi, A. Adnan, Meldi Suhatril, R.Ismail. 2013. ANFIS based Multi Staged Decision Algorithm for Seismic Safety Control of Concrete Faced Rockfill Dams. Journal of CFRD World. 1(2013. 1-13. (Non-ISI/Non-SCOPUS Cited Publication).



CCM 2.0 EDi - Copyright © 2008 - 2017 Universiti Malaya, 50603 Kuala Lumpur, MALAYSIA. http://www.um.edu.my